Plug and play design, Simple to make use of;
Dual relay output, have the ability to connect with refrigeration and heating equipment on the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, have the ability to display measured temperature and set temperature on the same time;
Compressor delay protection for refrigeration Keep an eye on
High and low temperature alarms are to be had;
Over-temperature and sensor fault alarm
Heating/Cooling differential serve as may well be set one after the other for refrigeration and heating to offer protection to temperature controller from violent change.
Temperature Keep an eye on Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Keep an eye on Mode :On/Off Keep an eye on, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Keep an eye on Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
F/C degree display; Simple to setup.
The sensor can easily be replaced.
Maximum output load: 1100W (120V).
Alarm when over-temperature and sensor error.
Dual display window, have the ability to display measured temperature and set temperature on the same time.